Interior Decoration Bamboo Charcoal wood veneer Fiber Pvc Wall Panel

Installation of protective wall panels

Measure: Measure the dimensions (length, width, height) on site and draw basic drawings by hand.

Draw blueprints: Based on the actual measured dimensions, use design software to create floor plans and construction drawings, calculate the required square meters of wall panels, the number of decorative lines, and related supporting facilities.

Installation of wall panels made of different materials

There may be slight differences in the installation of wall panels made of different materials, but they generally follow these four orders: first board and then line, from outside to inside, from bottom to top, and from top to wall.

✔️ Board first, line later

It refers to installing the main boards first, and then installing the lines. First, install extensively, and then handle details such as corners and edges.

✔️ From outside to inside

It refers to the installation sequence starting from the wall of the room entrance and moving inward. Because installation at the back requires cutting, installing from the outside in is more aesthetically pleasing.

✔️ From bottom to top

Install wall panels from bottom to top first.

✔️ Top first, then wall

It refers to installing the ceiling first and then installing the wall. When installing the ceiling, the keel should be fixed first, and the first wall protection panel should be fixed to the wall with steel nails before installation.

product Display

Exhibition show